JEANNEAU SUN FAST 3300

Designed by naval architects, Daniel Andrieu and Guillaume Verdier, and constructed entirely by infusion moulding, the Sun Fast 3300 benefits from exceptional resistance and rigidity, with considerable weight reduction. Because of this, it delivers not only excellent performance, but it also benefits from an advantage with regard to IRC handicap rules, notably due to its single fin keel and its adapted sail area.

Combining the light hull with twin rudders, carbon rig, generous sail plan, and straight keel, the 3300 excels as an offshore racer. Sailing fully crewed, double, or single handed, the Sun Fast is a truly exhilarating boat, not to be missed.

SEA BEAR is well equipped for Offshore Racing with all the bells and whistles. This is a turnkey boat that can instantly launch you into the Sun Fast 3300 class. Dry sailed on the Hamble, she is in commission and available for viewings.

Yacht Information

• Name: SEA BEAR - Hull No. 017
• Boat: Sun Fast 3300
• Builder: Jeanneau
• Year: Launched in Spring 2020
• Designer: Guillaume Verdier / Daniel Andrieu
• Water ballast system - 200L each side
• 2024 IRC Rating: 1.025 (Endorsed with 2 Jibs and 4 Spinnakers)
• Yard storage cradle with hull formers
• Location: Hamble Yacht Services - dry sailed

Engine

• Yanmar 2YM15 - 14hp inboard diesel engine
• Shaft drive
• Sterling Pro Save A Galvanic Isolator 16A
• Engine throttle in cockpit with removable handle
• Engine panel in cockpit
• 125AH alternator
• 2 blade folding GORI racing propeller
• 50L Roto-moulded diesel fuel tank on centreline
• Removable GRP companionway & side hatches for easy access to engine
• Fuel gauge

Mast and Rigging

• Axxon Carbon mast - deck stepped, twin aft swept spreaders.
• Nitronic 50-15 Rod forestay
• Dyform sthrouds. Textile backstays.
• Axxon Carbon boom
• Carbon bowsprit with both 1:1 and 2:1 tack lines + running rigging for asymmetric & Code sails
• Textile adjustable backstays with fine tune & return to primary winches
• Runner blocks have protective pads and can be held forward in light airs.
• All the running rigging is dyneema
• 2 x Genoa halyards
• 1 x Mainsail halyard
• 2 x Masthead spinnaker halyards (one of which converts to Fractional halyard)
• 2 x Genoa sheets + In-haulers + down-haulers
• 2 x Spinnaker sheets
• 2 x Code 0 sheets
• Runner retrieval lines
• Mainsheet with coarse and fine tune
• Double ended mainsheet traveller line
• Multi-purchase mainsail outhaul
• Mainsail reefing lines
• Barton boom vang
• Cunningham system
• Mainsail reefing strops
• Tack points for both Genoa and Spinnaker Staysails

Deck Hardware

• Stainless steel WS compliant pushpits, pulpit, stanchions and wire guardrails
• Canvas covered guard wire piping in way of cockpit
• Jib retaining bungee straps on foredeck
• Mooring cleats to port & starboard aft
• Moulded toe rail, WS compliant, and comfortable for crew hiking
• Full length mainsail traveller across cockpit floor
• 2 x Harken 40.2 Performa primary winches
• 2 x Harken 40.2 Performa coach roof winches
• 4 x Harken "One Touch" winch handles
• Harken and Spinlock deck gear - jammers, clutches, fairleads - with many additions over and above the standard spec
• Dedicated sunken life raft stowage area
• Central trimming pedestal
• Adjustable foot rack for helmsman
• Ceramic cam upgrades on some of the rope clutches
• Rope bags & winch handle pockets in cockpit
• Mainsail cover
• Mooring kit - fenders & warps
• Anchor kit - Fortress FX-11 + chain + warp

B and G Instruments and Electronic Packs

• Zeus3 9" MFD mounted in cockpit
• Navionics chart 28XG
• H5000 Hercules base pack (includes Graphic MFD at stb & port helms)
• H5000 Pilot Computer (includes Precision 9 compass, rudder reference unit, RF300 rudder feedback unit)
• Raymarine Type 1 linear drive short shaft 12v pilot ram
• 2 x H5000 Pilot Controllers (one at each helm)
• WR10 Autopilot remote control + base station
• H5000 Motion Sensor
• 3 x 20/20 Mast displays (including mast bracket)
• B&G v60 VHF with DSC + remote handset
• Hawk VHF antenna
• GO FREE Wi-Fi system
• NAIS 5000 transceiver (includes GPS, antenna splitter)
• Carbon VHMU (vertical mast head unit for wind) + bracket
• Fusion RA670 Apollo entertainment system with 4 x waterproof speakers
• H3000 Speed sensor + flush mount fitting
• DT800 Depth / Temperature sensor + flush mount fitting

Systems and Domestics

• EFOY Comfort 140i Methanol fuelled DMFC fuel cell
• Super B battery monitor
• Super B Lithium ION domestic battery (equivalent to 90AH) + Odyssey 680 12v/16AH engine start
• Extra Blue Seal 12v DC socket / USB charge socket
• Dual 110v/220v Shore power + waterproof dual voltage 20AH Victron battery charger + 220v socket + 20m lead all c/w Consumer Unit with RCD and Two MCB's with replacement RCD (110v) for North America & Outlet, UK type with replacement US type
• Webasto 3 outlet diesel cabin heating
• Iridium Certus 100 satellite telephone + external antenna
• Cyclops forestay load cell integrated to B&G instruments
• FourthCape electronic rudder toe angle adjuster system
• Slave computer screen at Nav table with cables for laptop connection

Safety Equipment

• Tri-colour light at mast head
• Anchor light
• LED sail trimming light on mast
• LED Deck Navigation lights (port / starboard / stern)

• Additional internal manual bilge pump for Cat.2 Regs
• Hatch retaining mechanism for Cat.2 Regs
• Jackstays on side decks & cockpit floor
• Ocean Ultralite 6 man liferaft – Carbon cannister
• Ocean Safety Jonbouy/Danbouy combo in white case
• Lots of additional Cat. 2 safety gear will be sold with the boat

Interior

• Sea water foot pump in galley
• Lee cloth kit in saloon
• Canting berths in aft cabins
• Plumbed sea toilet
• 2 burner gas hob (in store)
• 2 x Double aft cabins with removable fabric doors
• 2 x single berths in saloon
• Wooden factory supplied floorboards upgraded to foam cored laminate

North Sails

2020 Sails by North

• Mainsail 3Di
• J1 jib 3Di
• J2 jib 3Di
• J3 jib 3Di
• A1.5 Asymmetric spinnaker
• A2 Asymmetric spinnaker
• A3 Asymmetric spinnaker
• A5 Asymmetric spinnaker
• MHO - Masthead Code Zero with furler

2021 Sails by North

• Mainsail 3Di
• FRO - Fractional Code Zero

2022 Sails by North

• J1 jib 3Di

Other Sails by North

• Storm Jib / Genoa Staysail
• Spinnaker Staysail

Construction

• HULL: Infused GRP sandwich with balsa core. Infused structural liner glued into place
• DECK: Infused GRP sandwich with foam core
• BULKHEADS: Infused GRP sandwich moulded companionway, mast and forward bulkheads
• STEERING: Twin polyester rudders with stainless steel rudder stock. Self-aligning rudder bearings. Composite tiller with tiller extension. GRP support for autopilot ram
• KEEL: Straight IRC optimised flat keel, mixed lead/iron with epoxy surface treatment

Manufacturer Provided Description

Jeanneau Sun Fast 3300 is the brain child of Guillaume Verdier and Daniel Andrieu, whose collaboration guarantees high performance and success under a variety of rating rules.

Taking advantage of Jeanneau’s long history of infusion manufacturing, every part of the 3300 is infusion muolded, dramatically reducing the all-up weight of the boat while increasing stiffness. Combining the light hull with twin rudders, carbon rig, generous sail plan, and straight keel, the 3300 will excel as an offshore racer. Sailing fully crewed, double, or single handed, this Sun Fast is a truly exhilarating boat, not to be missed.